Tilting Axis 3+2 Axis Worm Gear CNC Machine Hydraulic Power Rotary Table

Product Description

 

Item/Model		UNIT	FHR-255C/255CL		FHR-320		FHR-400CF		FHR-500C		FHR-630C
Table Diameter		MM	ø255		ø320		ø400		ø500		ø650
Diameter of Table Central Hole		MM	ø110		ø150		ø150H7		ø250x40 deep		ø250x40 deep
Inner Diameter of Mandrel Sleeve		MM	ø80H7		ø120H7		ø120H7x40 deep		ø220H7		ø220H7
Diameter of Center Through Hole		MM	ø80		ø120		ø120		ø220		ø220
Table Height (Horizontal)		MM	290		355		380		440		480
Table T-slot Width		MM	12H7		14H7		14H7		18H7		18H7
Guide Block Width		MM	18h7		18h7		18h7		18h7		18h7
Axis		-	Rotation	Tilt ±110º	Rotation	Tilt ±110º	Rotation	Tilt ±110º	Rotation	Tilt ±110º	Rotation	Tilt ±110º
Min. Increment		deg.	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001
Indexing Precision(while tilt 0°~+90°)		sec.	15	60 *¹	15	50 *¹	15	60 *¹	15	60 *¹	15	60 *¹
Repeatability		sec.	6	8	6	8	6	8	6	8	6	8
Clamping System (Pneumatic)		kgf/cm²	35	35	35	35	35	35	35	35	35	35
Clamping Torque		kgf·m	70	140	115	175	115	275	370	410	370	800
Servo Motor Model	FANUC	Taper/Straight shaft	αiF4 / αiF8 / αiS12 / ßiS8(Taper)	αiF8 / αiS12 / ßiS12(Taper)	αiF8 / αiS12 / ßiS12(Taper)	αiF12 / ßiS22(Straight)	αiF8 / αiS12 / ßiS12 (Straight)	αiF12 / ßiS22 (Straight)	αiF12/βiS22	αiF22/βiS30	αiF12	αiF30
	MITSUBISHI	Taper/Straight shaft	HG/HF-104	HG/HF-154	HG/HF-104	HG/HF-204	HG/HF-154	HG/HF-354	HG/HF-204	HG/HF-354	HG/HF-204	HG/HF-703
Speed Reduction Ratio		-	1:120	1:120	1:120	1:120	1:120	1:120	1:120	1:180	1:120	1:180
Max. Rotation Rate of Table (Calculate with Fanuc α Motor)		r.p.m	25 *(25)	16.6 *(11.1)	25	16.6	25	16.6	25	11.1	25	11.1
Allowable Inertia Load Capacity (Horizontal)		kg.cm.sec²	8.13		25.6		40		93.75		40
Allowable Workpiece Load	0° Horizontal	kg	100		200		200		500		500
	0°~90°Tilt	kg	75		150		100		300		400
Allowable Load(with Rotary Table Clamping)	F	kgf	1500		1800		1800		3000		3200
	FxL	kgf·m	140		175		175		410		800
	FxL	kgf·m	70		115		115		370		370
Driving Torque(Rotary axis)		kgf·m	55 *(31)		80		80		250		250
Net Weight (servo motor excluded)		kg	296(Ø255C) / 312(Ø255CL)		470		818		1091		1867

 

Item/Model		Unit	FHR-400S		FHR-650S-525 / 550
Table Diameter		mm	Ø400		Ø650
Diameter of Table Central Hole		mm	Ø150		_
Inner Diameter of Mandrel Sleeve		mm	Ø120H7x200 deep		_
Diameter of Center Through Hole		mm	Ø150		_
Table Height (Horizontal)		mm	_		_
Table T-slot Width		mm	14H7		18H7
Guide Block Width		mm	_		_
Axis		‐	Rotation	Tilt ±110º	Rotation	Tilt (±110º)
Min. Increment		deg.	0.001	0.001	0.001	0.001
Indexing Precision		sec.	15	50	15	60 [30, if ECN-225 angle encoder is employed.]
Repeatability		sec.	4	8	4	8
Clamping System		kg/cm	35	35	35	35
Clamping Torque		kg-m	115	200	370	500
Servo Motor Model	FANUC	_	αiS12	αiF22(Straight)	αiF12	αiF40(Straight)
	MITSUBISHI	_	HG/HF-154	HG/HF-354	HF-204	HF-703
Speed Reduction Ratio		‐	1:120	1:150	1:120	1:150
Max. Rotation Rate of Table (Calculate with Fanuc α Motor)		r.p.m	25	13.3	25	13.3
Allowable Inertia Load Capacity		kg.cm.sec	44		158.4
Allowable Workpiece Load	0º Horizontal	kg	220		500
	0º~90º TiltTilt	kg	120		300
Allowable Load(with Rotary Table Clamping)	F	kgf	1800		_
	FxL	kgf.m	200		500
	FxL	kgf.m	115		370
Driving Torque(Rotary axis)		kg.m	80		250
Net Weight (servo motor excluded)		kg	482		1120